LED Scanner light wiring

Home / the12volt's Install Bay / Relays / LED Scanner light wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

drd4life

Member - Posts: 19

Joined: May 10, 2003

Location: Canada

Posted: May 10, 2003 at 7:05 AM / IP Logged

Hi! I'd like to know how to wire A LED scanner light with a switch that will run with the car on or off. It worked fine with my alarm, but as soon as I installed the starter disable relay, I guess it disabled the light to, since I had to use the same output from the alarm. Thank you!

Back to Top

z2428

Member - Posts: 1

Joined: April 29, 2003

Location: Canada

Posted: May 10, 2003 at 7:43 AM / IP Logged

Just run a slight single wire from your power terminal to your switch.

Back to Top

drd4life

Member - Posts: 19

Joined: May 10, 2003

Location: Canada

Posted: May 10, 2003 at 9:41 AM / IP Logged

Do I need to wire a relay?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 10, 2003 at 10:32 AM / IP Logged

No, if your using a switch it will act as the relay.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

drd4life

Member - Posts: 19

Joined: May 10, 2003

Location: Canada

Posted: May 10, 2003 at 12:29 PM / IP Logged

I have a led scanner light i'd like to wire to my alarm. it worked fine until I added the starter kill relay circuit on the same negative output of the alarm. now it won't come on at all. the starter kill works fine. its a three wire scanner light, red positive, black negative and blue switched. what do i do to make this work? i thought of running a seperate switch to turn it on when I leave the car, but there has to be a better way. Help!!

Back to Top

drd4life

Member - Posts: 19

Joined: May 10, 2003

Location: Canada

Posted: May 10, 2003 at 12:30 PM / IP Logged

thanks i'll try that

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED Scanner light wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.