98 Chevy s10 power mirrors wire colors

I have 98 Chevy S-10 and I had to replace the passenger side mirror.  I got an after market mirror and the connector is not compatible.  I need to splice the wires together, but I don't know which wires are which.  Also, the driver side mirror only move out, but when you press right on the control.  Any help you can give me would be greatly appreciated.

Here's what I know:

Passenger side:  cable harness yellow is in pin C of connector

                                                            PURPLE / white is in pin D of connector

                                                             RED / white is in pin E of connector

                                 Mirror has 4 wires: grey, blue, green and light green

Driver side:  White is spliced to white

                       Green is spliced to Green

                        Yellow is spliced to 2 wires blue and yellow

I may need to replace the mirror control switch module, but I'd like to get it all wired up right before I do that.

Thanks,    John

You could try this site..

http://www.e-toolbox.com/ads/