momentary switch use

Home / the12volt's Install Bay / Relays / momentary switch use (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dappa786

Member - Posts: 3

Joined: November 03, 2003

Location: United Kingdom

Posted: November 12, 2003 at 7:14 PM / IP Logged

Hi. I am doing a neon install inside my car . I am hoping to connect up to 10 different types of neon and led based products inside my car. I was hoping to use a momentary switch ( like a demister switch ) as I have a spare switch on my dashboard.

What relay would i need to use and how would i connect the switch to the relay as the switch is normally open. Also would 1 relay be sufficient to to power as many as 10 items.

Many thanks in advance.

dappa

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: November 12, 2003 at 8:24 PM / IP Logged

Using the diagram below you can use a momentary switch to turn on and off anything hooked to the relays.

If you need more then thirty amps then just wire additional relays off of the +output of the relay on the right.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

dappa786

Member - Posts: 3

Joined: November 03, 2003

Location: United Kingdom

Posted: November 13, 2003 at 4:13 AM / IP Logged

thanks man. i will try it out and let you know.

dappa

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

momentary switch use

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.