the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

why would alarm trigger after 30 min?


Post ReplyPost New Topic
< Prev Topic Next Topic >
keepitsimple 
Member - Posts: 5
Member spacespace
Joined: March 28, 2009
Location: Texas, United States
Posted: March 28, 2009 at 6:32 PM / IP Logged  

greetings all,

a few days ago i put in an autopage c3rs900 in a buddy's 06 pathfinder.  it worked fine for about a day or so but now the alarm goes off without any sort of disturbance to the vehicle at 30 min intervals (i had it parked inside a closed garage and watched it like a pet monkey since i didn't believe it at first.  sure enough right at about 30 min it goes off. )   and the 2-way shows an open door after it has triggered but the vehicle hadn't been touched in any sort of way.  i'm completely dumbfounded at this point so if anybody can offer some help in diagnosing this i will be forever grateful.  thanx.

just because you can doesn't mean you should
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 28, 2009 at 9:22 PM / IP Logged  
Look on this site for diode blocks on door contacts specifically DEI tech sheet # 1076.  Your body control computer is going into sleep or shutdown mode and waking up every 30 mins to do a self check.  This sends a "spike" round the system and the alarm thinks its a door trigger,  it's easier for you to look at the diagramme then you will know what to do
keepitsimple 
Member - Posts: 5
Member spacespace
Joined: March 28, 2009
Location: Texas, United States
Posted: March 29, 2009 at 11:14 PM / IP Logged  
first off thanx for the response.  i did what doc 1076 said and diode isolated the door triggers (1 amp diodes from radio shack).  the 2way stopped showing the open door but then the alarm wouldn't trigger when any of the doors opened.  that kinda had me concerned  so i went ahead and skipped the individual door triggers and tried to use the vehicle dome supervision.  that fixed the whole door trigger problem that arose but i ran back into the 30 min problem again.   i kinda figured that i could diode isolate that one but then i was back to the whole no trigger when door is opened problem.  i know its got to be something simple to fix this but i'm so frustrated that its probably staring me in the face and i'm not seeing it.  any other ideas?
just because you can doesn't mean you should
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 30, 2009 at 3:18 AM / IP Logged  
After you followed 1076, did you test it with a DMM?
keepitsimple 
Member - Posts: 5
Member spacespace
Joined: March 28, 2009
Location: Texas, United States
Posted: March 30, 2009 at 10:53 AM / IP Logged  
i did follow 1076 and had each door trigger isolated, made sure diodes were facing the right way, and verified negative trigger with DMM.  when it wouldn't trigger alarm when the doors were opened, that's when i decided to just use the dome supervision and ran back into 30 min problem.  i did notice on the 2way that when the door triggers were isolated the open door no longer showed up.  the only thing i can think of is i used the wrong diodes but i bought the 1amp suggested by the doc.  i'm lost.  could it be something not related to the door trigger that's picking up the "spike" and thinking its a door trigger?
just because you can doesn't mean you should
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 30, 2009 at 12:31 PM / IP Logged  
Did you remember to to this on the trunk switch?
keepitsimple 
Member - Posts: 5
Member spacespace
Joined: March 28, 2009
Location: Texas, United States
Posted: March 30, 2009 at 2:36 PM / IP Logged  
i went ahead and disconnected it because i ran out of diodes (forgot to get one for it when i went to buy the others)
just because you can doesn't mean you should
keepitsimple 
Member - Posts: 5
Member spacespace
Joined: March 28, 2009
Location: Texas, United States
Posted: March 30, 2009 at 2:38 PM / IP Logged  
now that i think about it, wouldn't it show an open trunk on the 2way instead of open door if that were the case?
just because you can doesn't mean you should
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 30, 2009 at 3:08 PM / IP Logged  
Sorry I was clutching at straws!  There's a post in the security section,  I think about troubles with a Viper it relates to a similar vehicle to yours,  it might be worth reading.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer