2008 steering wheel remote harness

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2008 steering wheel remote harness (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

billpict

Member - Posts: 2

Joined: August 05, 2012

Location: Connecticut, United States

Posted: August 05, 2012 at 10:17 AM / IP Logged

I'm new here and hope this is the right forum. I'm trying to install a Pac steering wheel remote adaptor for my AVIC D3

and for the life of me cannot find

the 16 pin plug under the wheel that goes up to the OEM wheel controller. I only need to insert one wire (the white one) into this plug,

but it is no where in sight. I'm looking at where the wiring comes out of the steering wheel and below.

Any help ?

Thanks, Bill

billpict

Member - Posts: 2

Joined: August 05, 2012

Location: Connecticut, United States

Posted: August 05, 2012 at 10:20 AM / IP Logged

Sorry, the above model is the RENO

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 steering wheel remote harness

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.