2012 toyota highlander w/push start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2012 toyota highlander w/push start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gw99

Member - Posts: 6

Joined: November 17, 2012

Location: Missouri, United States

Posted: November 17, 2012 at 11:42 AM / IP Logged

Hello,

I am looking for wiring diagrams for a compustar remote start installation with an idatalink ADS-Blade. I have heard I only need to connect power, etc and that the bypass module will handle everything else.. is this true?

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 17, 2012 at 1:57 PM / IP Logged

You will need a ADS Blade AL flashed with Blade AL(DL) TL1 firmware. Here is a link to the install guide which shows

all the necessary wiring : http://www.idatalink.com/support/get-install-guide/guide_id/6781 As shown on the Type 3

diagram, the Compustar's Ignition1 output, with diode, is used. Below is a notice from the install guide.

IMPORTANT:

1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.
2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

Soldering is fun!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2012 toyota highlander w/push start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.