Need Wiring Diagram for 2001 Acura CL

Any help is appreciated! Thanks!!

Try this: Acura » CL » 2001 12 VOLTS white + ignition harness     STARTER 1 BLACK/ white + ignition harness     IGNITION 1 BLACK / YELLOW + ignition harness     ACCESSORY 1 yellow + ignition harness     POWER LOCK BLACK/ blue - passenger fuse box      Located in a green 20-pin connector. Use the key switch in the passenger door to test. POWER UNLOCK orange - passenger fuse box      DISARM NO UNLOCK blue - drivers door key cylinder     FACTORY ALARM ARM arms with lock        FACTORY ALARM DISARM disarms with unlock        PARKLIGHTS POSITIVE RED / black + passenger kick panel     PARKLIGHTS NEGATIVE red / YELLOW - left of steering column     HEADLIGHT blue/red - left of steering column     BRAKE WHITE/ black + brake pedal switch     DOOR PIN BLACK/ white - passenger fuse box     HOOD PIN yellow - passenger fuse box     TRUNK PIN blue/green - drivers fuse box     DOMELIGHT SUPERVISION use door trigger        TACH blue   drivers shock tower      In a 2-pin connector near the air intake on the drivers side shock tower. VSS blue/white   cruise control module      The cruise control module is to the right of the steering column. TRUNK RELEASE white + passenger mux module      The passengers MUX module is located behind the glove box. HORN lt. GREEN/ blue - steering column    Special Note: This vehicle has an immobilizer system that needs to be bypassed when adding remote start. Use DEI part number 555H or 555U. Prepare your future. It wasn't the lack of stones that killed the stone age.

This is for a remote start, Viper 790xv to be exact.  Will the diagram you gave me above all I need? Thanks again.