Alarm/Remote Entry/Starter for Camry 1996

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Alarm/Remote Entry/Starter for Camry 1996 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mickeyvnminnie

Member - Posts: 4

Joined: January 17, 2005

Location: United States

Posted: January 17, 2005 at 1:06 PM / IP Logged

Hi guys,

I need the wirring diagram to install a alarm/ remote entry/ remote starter for 1996 Toyota Camry. Please help.

Thanks a lot

Back to Top

Search for other posts by mickeyvnminnie

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: January 17, 2005 at 8:29 PM / IP Logged

Constant 12 volts	WHITE/ RED & WHITE	IGNITION SWITCH HARNESS
Ignition 12 volts	BLACK/ ORANGE	IGNITION SWITCH HARNESS
Starter	BLACK/ WHITE	IGNITION SWITCH HARNESS
Dome Light	RED / WHITE (-)	6 PIN BLUE CONNECTOR AT FUSE BLOCK *
Trunk Pin Switch	RED / WHITE (-) (SEDAN)	RED / YEL (-) (COUPE) AT LIGHT IN TRUNK
Parking Lamp	GREEN (+)	11 PIN CONN. AT TOP OF FUSE BLOCK *
Power Lock	L GREEN	20 PIN BLUE CONNECTOR **
Power Unlock	D GREEN	IN DRIVER KICK PANEL

* Fuse Block Located In Driver Kick Panel. ** Child Safety Locks: BLUE/RED (-) In Same Connector As Door Lock Wires Above.

Child Safety Locks

Accessories
Window Up	D\ GREEN P\ GRN/WHT D\ GRN/YEL P\ GRN/BLK @ MAIN SWITCH
Window Down	F/ RED F/ RED / BLU R/ RED / YEL R/ RED / BLK
Ign Key Warn	RED / BLUE (-)	STEERING COLUMN HARNESS
Trunk Release	BLUE/BLACK (+)	18 PIN CONN. IN DR. KICK PANEL**
OEM Horn	GREEN/ BLACK (-)	STEERING COLUMN HARNESS
Headlights	RED / YELLOW (-)	AT HEADLIGHT SWITCH
OEM Alarm Arm	N/A	NO OEM ALARM PRESENT
OEM Alarm Disarm	N/A	IN SCHEMATICS

Reversal Rest At Ground Power Window Circuit

** Rear Door Unlock (Wagon Only)

Trunk Release Reversal Rest At Ground

Remote Start
Tach Signal	BLACK	AT IGNITER (4 CYLD) OR ECM (6 CYLD) *
Ignition #2	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #3	N/A
Accessory	PINK/BLUE	IGNITION SWITCH HARNESS
Neutral Safety	NOT GROUNDING TYPE	OEM SWITCH OPENS STARTER CIRCUIT
Brake Light	GREEN / WHITE (+)	AT SWITCH ABOVE BRAKE PEDAL
Reverse Light	RED / BLACK (+)	10 PIN CONN. IN DRIVER KICK PANEL
Rear Window Defrost	N/A	TIMER BUILT INTO SWITCH

* Igniter Located On Driver Strut Tower (4 Cylinder Only), Engine Control Module (ECM) Located Behind Glove Box (6 Cylinder Only). BLACK Wire Also Located In 15 Pin Connector At Fuse Block In Driver Kick On Both.

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

mickeyvnminnie

Member - Posts: 4

Joined: January 17, 2005

Location: United States

Posted: January 18, 2005 at 10:59 AM / IP Logged

Thanks a lot. It's very helpful

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm/Remote Entry/Starter for Camry 1996

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.