Installing Kenwood in jeep?

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Installing Kenwood in jeep? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sata x

Member - Posts: 2

Joined: April 02, 2005

Location: United States

Posted: April 02, 2005 at 7:37 AM / IP Logged

I just bought a new kenwood radio for my 95 grand jerokee. I can't get no sound! I think I wired it up right. I bought the jeep from an individual, and the factory one was tore up, missing buttons and nobs. It would come on but I didn'y really no what was what? I think it has a factory amp, so I'm not sure what to do. I have took some wires and just hooked up one of the door speakers and it works fine. I bought the after market harness for it, but I have two wires that is left over, ORANGE / white, and a cream color for mute?

I don't know, that is why I am here!

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: April 05, 2005 at 9:48 PM / IP Logged

If you had the Factory Infinity Radio, U need to POWER the Last Wire in the Black Plug. Which should be the BLUE wire on your After Market Harness.

Should be wire for wire (same color) from your Kenwood to your After Market Harness.........If it doesn't come on then check BOTH fuses on Kenwood and BOTH Fuses in Fuse Box........

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

sata x

Member - Posts: 2

Joined: April 02, 2005

Location: United States

Posted: April 06, 2005 at 8:12 PM / IP Logged

I found out the factory amp was blown! I'll just pick up another one.

I don't know, that is why I am here!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Installing Kenwood in jeep?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.