2003 Grand Am Firewall gromet

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2003 Grand Am Firewall gromet (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

brockotherock

Member - Posts: 1

Joined: April 24, 2006

Posted: April 24, 2006 at 12:14 PM / IP Logged

I am tring to find an existing gromet to pass a 4 gage amp wire throught the firewall of my 2003 Grand Am so I do not have to drill a new hole. Any one have a diagram, explanaiton or better suggestion?

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: April 24, 2006 at 2:33 PM / IP Logged

Under the driver's side dash you will see a large harness passing through the firewall near the kick panel. The grommet it goes through should have enough room in it for you to cut a small slit in it to pass the cable through. Use some putty to re-seal the gap around the hole to prevent water leaks.

sparky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Grand Am Firewall gromet

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.