the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 Pontiac Aztec Radio Removal


Post ReplyPost New Topic
< Prev Topic Next Topic >
bluecobraclone 
Member - Posts: 17
Member spacespace
Joined: January 12, 2007
Posted: January 12, 2007 at 9:18 PM / IP Logged  
Hello,
I'm looking for detailed instructions on how to remove the radio from a 2004 Pontiac Aztec.... I need to get to the BCM behind the radio to put in a remote starter.
Thanks!
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 12, 2007 at 11:21 PM / IP Logged  

Look at the drivers side of the center console....theres a small door. Take it off and there is the keyless module.

Door pins, locks parking lights factory security horn....it's all there.

bluecobraclone 
Member - Posts: 17
Member spacespace
Joined: January 12, 2007
Posted: January 13, 2007 at 12:58 PM / IP Logged  
Hello,
Thanks for the quick reply! So will this give me enough room to tap into all these wires?
How bout to get to the ignition harness, is there screws to get the trim panel apart?
Also does anyone know which wire is the rear defrost wire? I'm putting in a Code Alarm CA 630, and it has a 500 mA negative output.
Thanks!!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer