no room for dbl din hu in 07 silverado

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / no room for dbl din hu in 07 silverado (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

killing switch

Member - Posts: 7

Joined: May 24, 2009

Location: Texas, United States

Posted: May 24, 2009 at 12:33 AM / IP Logged

Im installing a kenwood ddx514 dbl din in place of my stock nav/bose. I am using a axxcess gmos lan 02 harness and keeping the oem bose system but adding sub. my questions are:

A. what are ppl doing to get around the shallow depth on the right side where the rcas stick out on the back of the hu? 90 degree rca ends? cut? driil?

B.where are you guys typically installing the harness box and mess of wires? I have mine under the unit (on top hvac control) but its tight. it could also be causing depth issues. I dont like like jamming it in there, etc

what I have is an axxess gmoslan02 harness, perph steering control module and im using the rca preouts for amps.

advise. thnx

Search for other posts by killing switch

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 24, 2009 at 11:52 AM / IP Logged

Just did a 09 two days ago, but only with single DIN. We located the interface module by the glove box because of the vent issue. This allows more room for the RCA's and the rest of the wires to tuck in better.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

killing switch

Member - Posts: 7

Joined: May 24, 2009

Location: Texas, United States

Posted: May 25, 2009 at 9:56 PM / IP Logged

so I was able to put the gmos lan02 on top of the cig lighter insert which is directly behind the hvac insert which worked out pretty well. I did however have to cut the first layer of plastic off of the back of the dash to fit the rca's from the hu. a good tip (for anyone else doing the same) is to use string to the cut the plastic since you'll will never get any normal cutting tool back there. pull the string behind the plastic and pull in a see saw motion. it will cut it. quick.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no room for dbl din hu in 07 silverado

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.