the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

lines in sony screen pleasehelp

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / lines in sony screen pleasehelp (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
kickasstahoe 
Member - Posts: 6
Member spacespace
Joined: April 29, 2003
Location: United States
Posted: April 29, 2003 at 9:17 AM / IP Logged  
  I have a 97 chevy tahoe and i put a sony flip up screen and a farenhiet dvd player in.  The screen is in the dash and the dvd is in the  center console.  I am geting alot of lines when car is running but no lines when car is in aux.  What do i do?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 29, 2003 at 11:03 AM / IP Logged  
Check that your ground for both devices are clean, paint free & short. Do not extend the ground for the DVD player to the back of the dash as the resistance will be very high on the player and cause problems. Another thing to look for is to make sure that your power wires are not running along side your RCA/Video wires.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
kickasstahoe 
Member - Posts: 6
Member spacespace
Joined: April 29, 2003
Location: United States
Posted: April 29, 2003 at 12:36 PM / IP Logged  
i have very short grounds now and the power wire is know where nearthe rca/video wires.  It still has lines.  What else could i do?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 29, 2003 at 12:47 PM / IP Logged  
Try using different RCA wires for the video. Another thing onemember did was check the video jack and see if it was a cold solder to the unit. This was the case and it caused alot of grief for him
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
kickasstahoe 
Member - Posts: 6
Member spacespace
Joined: April 29, 2003
Location: United States
Posted: April 29, 2003 at 3:47 PM / IP Logged  
i am getting black bars now when i turn up the volume what could cause this?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 01, 2003 at 8:26 AM / IP Logged  
Where did you tap your power source from ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
kickasstahoe 
Member - Posts: 6
Member spacespace
Joined: April 29, 2003
Location: United States
Posted: May 04, 2003 at 7:52 PM / IP Logged  
i fix the black bars when the bass hits but still have very little lines when truck is running
kickasstahoe 
Member - Posts: 6
Member spacespace
Joined: April 29, 2003
Location: United States
Posted: May 05, 2003 at 8:56 PM / IP Logged  
behind the deck it works better with the poer there

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer