the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

how to hook up led light in car


Post ReplyPost New Topic
< Prev Topic Next Topic >
peppers 
Member - Posts: 10
Member spacespace
Joined: April 11, 2009
Location: Missouri, United States
Posted: April 12, 2009 at 10:53 PM / IP Logged  
i am an idiot wrote:
The resistor is not direction sensitive. However there is a ground and positive connection on the LED.
but u said not to ground it otherwise it wont blink right?
i am an idiot 
Platinum - Posts: 13,716
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: April 12, 2009 at 10:58 PM / IP Logged  
Connect the ground terminal of the LED to the Grey wire on the harness that plugs into the back of the radio. The positive terminal connects to the Blue / YELLOW wire on that same plug.
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, July 16, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer