further programming for ultrstart u1280

WOW this is great.

Now my truck wont start the starter is staying on and I have to turn the key back. I have reset the system with no change and disconnected the battery I hope this is not Ultra start related

This is happening with a standard key start or with a remote start?  If it's with a remote start attempt, after a System Reset, the Tach signal must be re-learned ( assuming the Blue/White Tach wire was connected to a tach source on the vehicle).  This should happen automatically the first time you start the vehicle with the key.  See Page 9 of the Install Guide.

If it's with a key start, we need more info.  What type vehicle ( year, make, model )?

Soldering is fun!

2007 dodge ram 2500 5.7 hemi

I did get it started after pushing it beyond what I should of. Now it all seems fine.

Here it is from the begining.

Yesterday after stopping the parking lights stayed on so I was like what the heck. So I pulled fuses and nothing until I pulled the 30A in line fuse that comes right off the battery that supplies the power to the ultrastart.

So stopped by the guys that installed it and wanted to get it reprogrammed like it was. No help what so ever. Now with your help I got it all back and then the starter issue. By the way the blue LED was blinking fast when the starter was stuck on.

Glad it's working now.    With the 2007 Ram P/U there is also a bypass module ( there are many possibilities ) in use besides the U1280.  Pulling the fuse could have upset the bypass module.  You might want to check the Bill of Sale for the R/S install ( or take a peek under the dash ) to see which one was used and download info on it for future reference also.Soldering is fun!

will do

Its going in for service tomorrow. The parking lights came on when the doors were locked tonight. What a piece of !@*#. Goes to show you use factory parts not after market.

my dog just barked and my truck started by itself WOW