Posted: May 10, 2005 at 12:34 PM / IP Logged
Posted: May 10, 2005 at 8:19 PM / IP Logged
Posted: May 12, 2005 at 8:38 AM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Friday, November 7, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Friday, November 7, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.




The neons will be supplied with ground from a connection bolted to the chasis.
How do I wire up a relay to supply +12volts activated by the latched negative aux channel from my alarm? Also do I need to use any diodes?
Any help much appreciated thanks.






, that diagram sorted my mini install.
Also does it matter if pin 86 is the negative input and 85 the fused 12v constant?
Thanks Mo.