Modding Avic-N1/N2 Nav DVD’s

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation - Hot Topics / Modding Avic-N1/N2 Nav DVD’s (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

jasonhilton

Member - Posts: 23

Joined: October 10, 2005

Posted: April 20, 2006 at 5:01 PM / IP Logged

A lot of the modding/hacking progress is on www.avic411.com

We cracked the pim format, can upload custom backgrounds and are currently working on the XM Logo Table.

xxloganxx

Member - Posts: 2

Joined: April 22, 2006

Location: United States

Posted: April 22, 2006 at 10:47 AM / IP Logged

Guys...

Just read every page of this thread... most of you are damn near geniuses. My first question is what happened to the rars posted on newsreaders? Only 1 out of 103 made it and only one set of Par2's? Retention is only about 20 days? Can someone repost them for the CND-V60MT East? Secondly, if I am following correctly... no one has successfully installed the V60 on a N1 and is still able to watch/nav in motion yet right? Has anyone even been able to successfully update to the V60 and still have a perfect working unit while NOT in motion? I have an N1 and all I want to do is have the upgraded software and still watch movies and nav while in motion... I am still waiting on a resolve if I'm not mistaken!?!

avic-n1

whtcrxghst

Copper - Posts: 210

Joined: August 05, 2005

Posted: April 22, 2006 at 11:06 AM / IP Logged

Go to POI search. Press the button on the bottom that looks like north america. Thats how you select your region on a real disk at least

b18c5er wrote:

so then wtf happened to mine. Damnit, i'm worried again. I love the new software, you are right, it is a lot faster and because of the new colour schemes, I can see it better while in the drivers seat.

How can I reset my unit to the point where I have to pick my region? I remember when I took my car back to Best Buy to get a ground loop fixed, my navi asked me to pick a region number that was displayed on a map on the screen. I had to pick number 12 I think for Ontario. When that screen was up, I was also limited to the same options I have now, so i'm thinking maybe I can do that same region selection again and hopefully that will work.

So anyone knowhow to reset the navigation fully?

b18c5er

Member - Posts: 30

Joined: March 03, 2006

Location: Canada

Posted: April 22, 2006 at 5:41 PM / IP Logged

SUCCESS!!! It was a bad disc that I burned. I had torrented a cracked version of alcohol 120% and burned the first disc. So I uninstalled that version and then downloaded a demo version straight from the manufacturer's website. Burned it again and VOIALA! All of the normal features returned. Thank you guys for all of your help.

As for the statement that said you have to mod your N2 to have the v60 discs work, that is false as my unit still isn't modded. I will probably try to mod it tomorrow.

The unit is a lot faster, routes are calculated faster and the new graphics make it easier to see the screen from further angles.

Thanks again to all.

rutcgr18

Member - Posts: 45

Joined: May 26, 2005

Location: United States

Posted: April 23, 2006 at 2:34 PM / IP Logged

Just thought i would let you all now i have installed the 60 software and the units runs like a charm on my n2. Like the new look

xxloganxx

Member - Posts: 2

Joined: April 22, 2006

Location: United States

Posted: April 24, 2006 at 7:50 PM / IP Logged

From what I understand... isn't it "supposed" to work!! I mean that's what they are upgraded discs.. however the issue here is to have them work on all units and have the video bypass. Doesn't seem like there's much progress though.....ergh!

avic-n1

explor202

Member - Posts: 49

Joined: December 26, 2003

Location: United States

Posted: April 25, 2006 at 7:18 PM / IP Logged

I have decided to try and sell my N1 so I can upgrade to the D1. It's a 2 month old Pioneer refurb unit and $700 takes it. I have the original box/packaging, and will include the 40, 50 and 60 software. PM's only if you're interested.

A.S.E.certified: Steering/Suspension, Brakes, Engine Performance, Engine Repair, Customer Service.

duramaxkiller

Member - Posts: 7

Joined: March 21, 2005

Location: United States

Posted: April 27, 2006 at 12:26 AM / IP Logged

SO in short of reading 47 pages ...can u upgrade n2 mapping into an N1 without being motion blocked ?

wojtekg

Member - Posts: 20

Joined: April 20, 2006

Posted: April 27, 2006 at 5:48 AM / IP Logged

Yes you can but only up to version CNDV-50 V1.1 once you upgrade to version 1.2 or CNDV-60MP you will get Blocked out

whtcrxghst

Copper - Posts: 210

Joined: August 05, 2005

Posted: April 27, 2006 at 12:43 PM / IP Logged

Thats not correct. You cannot go to the CNDV50 or CNDV60 without the lockout affecting your N1

wojtekg wrote:

Yes you can but only up to version CNDV-50 V1.1 once you upgrade to version 1.2 or CNDV-60MP you will get Blocked out

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.