Making passive crossover for speakers

Home / the12volt's Install Bay / Car Audio / Making passive crossover for speakers (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

The_Observer

Member - Posts: 5

Joined: April 09, 2002

Location: Canada

Posted: April 09, 2002 at 3:39 PM / IP Logged

I basically want to minimize the bass for the 4" fronts in my car because of the distortion. I was wondering where do I get the capacitors in order to do this and is there anything else I should know. Thanx anyone, I need help!

the12volt

Administrator - Posts: 3,957

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: April 09, 2002 at 4:30 PM / IP Logged

Hi The_Observer, you can purchase non-polar capacitors from your local car audio shop , most any Radio Shack, on-line from lots of places, just search for "non-polar capcitors", or from your local electronics shop.

Places on-line:

http://www.chokes.com/cappc.htm

http://www.dynavox.com/xoverprt.htm

http://www.radioshack.com/category.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F010%5F002%5F000%5F000&Page=1

Other info for passive crossovers:

https://www.the12volt.com/caraudio/cross.asp

https://www.the12volt.com/caraudio/cross4ohm.asp

the12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Making passive crossover for speakers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.