multi-sub from mono amp

Home / the12volt's Install Bay / Car Audio / multi-sub from mono amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Eric Sigman

Member - Posts: 3

Joined: May 02, 2002

Location: United States

Posted: May 02, 2002 at 5:11 PM / IP Logged

I am currently in the process of trying to build my own crossovers for one 6" bazooka tube, two 8" rockford subs, and two 15" lightning audio subs. I want to know if i could run them all from a single rockford bd1000 mono amp. all of the crossovers are 12 db per octave and i have designed them each specifically for the resistance from the set of subs that they will be running. does anyone think i will have any trouble doing this, and if so, what? thank you for your time and your help will be appreciated. multi-sub from mono amp -- posted image.

multi-sub from mono amp -- posted image.

Eric Sigman

the12volt

Administrator - Posts: 3,957

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: May 02, 2002 at 6:23 PM / IP Logged

Hi Eric, keep in mind that impedance is relative to frequency and as long as you do not drop below the amplifier's minimum stable impedance rating over the range of frequencies you'll be filtering to each of the subs, you should have no problems running all of them off of any amplifier.

the12volt • Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

multi-sub from mono amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.