the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

door panel removal


Post ReplyPost New Topic
< Prev Topic Next Topic >
04nata 
Copper - Posts: 358
Copper spacespace
Joined: April 22, 2008
Posted: September 08, 2008 at 12:40 PM / IP Logged  

Anybody out there got a step by step (pics would be nice) of how to remove the door panels on a 2004 Hyundai Sonata? front and rear......I know that replacing the 6x9 speakers in the back is a job and a half but have no clue where to start on the panels, and I do not want to break anything

I had a bad experience with my Mazda pickup doing the same thing and I am not a patient person.

traviscoots 
Member - Posts: 15
Member spacespace
Joined: August 01, 2008
Location: Missouri, United States
Posted: September 11, 2008 at 12:50 AM / IP Logged  

if you arent patient have someone else do it.

but i would start by looking for the obvious pieces that pop off or are fastened down, usually around the handles and side mirror etc. if you are certain all screws are out start at the bottom, it will either snap off or slide up and out. if you pull on the bottom and you dont here or feel any snaps then push in and pull up and it should just slide up and then pull off.

possibilities are limitless. if you can think it you can do it.
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: September 11, 2008 at 5:59 AM / IP Logged  
You would be better off checking a Sonata specific forum.  Most specific forums have detailed DiY for door panel removal or speaker replacement.
Kevin Pierson
megaman 
Copper - Posts: 385
Copper spacespace
Joined: June 24, 2008
Location: Montana, United States
Posted: September 11, 2008 at 9:02 AM / IP Logged  

1. Extract (4) phillips head screws from perimeter of the door panel. 2. Extract (1) phillips head screw from door release cup and then remove the window/door lock control panel with a panel removal tool.  3. Unsnap and remove the cover from the bottom of the door handle cup. Remove (1) phillips head screw from behind then remove the cup.  4. Remove (2) plastic screw covers from outer side of the door panel, and remove (2) phillips head screws from behind the covers. 

Viola' your panel is removed.

This is the procedure for the 2000 - 04 sonata's.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer