the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

how to change x shield alarm crank time


Post ReplyPost New Topic
< Prev Topic Next Topic >
tuan587 
Member - Posts: 2
Member spacespace
Joined: April 16, 2008
Location: Australia
Posted: April 22, 2008 at 3:20 AM / IP Logged  
Hi guys! could you please help me with this i will be really appriciate. I just install a X-SHIELD XS-800S car alarm on my Evolution Lancer by professional but he dont even know how to change the cranking time of this alarm. Because of the new cams in the engine made the car take more cranks to able to start the car. But the alarm they only set about 2 seconds cranking time. I would like to ask you guys show me how to change the cranking time on the alarm X-Shield XS-800s. Thank you
tuan587 
Member - Posts: 2
Member spacespace
Joined: April 16, 2008
Location: Australia
Posted: April 29, 2008 at 7:52 AM / IP Logged  
tuan587 wrote:
Hi guys! could you please help me with this i will be really appriciate. I just install a X-SHIELD XS-800S car alarm on my Evolution Lancer by professional but he dont even know how to change the cranking time of this alarm. Because of the new cams in the engine made the car take more cranks to able to start the car. But the alarm they only set about 2 seconds cranking time. I would like to ask you guys show me how to change the cranking time on the alarm X-Shield XS-800s. Thank you
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: April 29, 2008 at 8:27 AM / IP Logged  
If you paid someone to install a system for you it should be hooked up using the tachometer monitoring feature. A tachometer reference will ensure the starter cranks for as long as required and not any longer. I am not familiar with that particular brand but I have not seen any units that do not have some type of tachometer reference input.
Installer, IT support, and FFL. I need less hobbies.
jonnyafk 
Member - Posts: 5
Member spacespace
Joined: May 22, 2006
Location: Ohio, United States
Posted: April 29, 2008 at 8:47 AM / IP Logged  
one way or another, it should have come with an instruction guide of some sort. i would try to contact the manufacturer about obtaining one and attempt to switch it to tachometer monitor.
i remember installing one of those off-brand remote starts. it was pretty horrible, the install guide had been awfully translated.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer