Viper 4806V in a 2001 Chevy Prizm

I am installing a Viper 4806V Remote Start in my Chevy 2001 Prizm, which is a 2001 Toyota Corolla with Chevy emblems. I already had a working remote, but its range was pitifully low and I am replacing it. I am fairly certain I have the correct wires in my wiring harness, but I need help hooking those wires to the Viper. Here is what I propose to do: Chevy  - Viper Ignition Switch 12V lead     - Pin 1 on 8 pin block RED / Black Ignition Switch 12V lead     - Pin 4 on 8 pin block Red Ignition Switch 12V lead     - Pin 7 on 8 pin block RED / White Ignition Switch 12V lead     - Pin 1 on 6 pin block Red Ignition Switch Starter Lead - Pin 5 on 8 pin block Violet Ignition Switch Acc Lead     - Pin 6 on 8 pin block Orange Ignition Switch Ign 1 Lead   - Pin 8 on 8 pin block Pink Ignition Switch Ign 2 Lead   - Pin 3 on 8 pin block Pink/White Rear Defog Relay Ground Lead - Pin 2 on 24 pin block Blue/White Tach lead     - Pin 12 on 24 pin block Violet/White Brake switch lead - Pin 20 on 24 pin block Brown Hood Pin Switch  - Pin 9 on 24 pin block Gray Ground        - Pin 2 on 6 pin block Black I also intend to hook up the Viper's neutral safety switch lead and control center lead. This is to be a simple hook up, no bells and whistles. Have I missed anything? I can provide more info if needed, I may have made this post too brief.

I've added the Viper descriptions for the wires. Sorry for not doing so initially. Any help would be greatly appreciated. I am installing a Viper 4806V Remote Start in my Chevy 2001 Prizm, which is a 2001 Toyota Corolla with Chevy emblems. I already had a working remote, but its range was pitifully low and I am replacing it. I am fairly certain I have the correct wires in my wiring harness, but I need help hooking those wires to the Viper. Here is what I propose to do: Chevy  - Viper Ignition Switch 12V lead     - Pin 1 on 8 pin block RED / Black (+)12v DC Constant Input for ACC and starter relays Ignition Switch 12V lead     - Pin 4 on 8 pin block Red (+)12v DC Constant Input for Ignition 1 Relay Ignition Switch 12V lead     - Pin 7 on 8 pin block RED / White (+)12v DC Constant Input for Ignition 2 and Flex Relays Ignition Switch 12V lead     - Pin 1 on 6 pin block Red (+)12v DC Constant Input Ignition Switch Starter Lead - Pin 5 on 8 pin block Violet (+)Starter Output Ignition Switch Acc Lead     - Pin 6 on 8 pin block Orange (+)Accessory Output Ignition Switch Ign 1 Lead   - Pin 8 on 8 pin block Pink (+)Ignition 1 Input/Output Ignition Switch Ign 2 Lead   - Pin 3 on 8 pin block Pink/White (+)Igniton2/Flex Relay Output Rear Defog Relay Ground Lead - Pin 2 on 24 pin block Blue/White (-)200ma 2nd Status/Rear Defogger Output Tach lead     - Pin 12 on 24 pin block Violet/White Tachometer Input Brake switch lead - Pin 20 on 24 pin block Brown (+) Brake Shutdown Input Hood Pin Switch  - Pin 9 on 24 pin block Gray (-) Hood Pin Input (NC or NO) Ground        - Pin 2 on 6 pin block Black (-) Chassis Ground I also intend to hook up the Viper's neutral safety switch lead and control center lead. This is to be a simple hook up, no bells and whistles. Have I missed anything? I can provide more info if needed, I may have made this post too brief.