
the12volt's Members' Downloads: Tech Tips - Car Security
Welcome to the12volt's Install Bay members' downloads section.
This is an exclusive section available only to our members.
You must log in
before you may begin downloading files.
Please Note: Many of these files were uploaded directly by members of the12volt's Install Bay.
While we attempt to scan all files for viruses before making them available to you, we strongly recommend
that you scan any and all files for viruses before opening them.
Browse or Search for Files |
Browse by category
Or enter a search term
| |
|
Your ad blocker is preventing this page from displaying correctly.
Tech Tips - Car Security
Displaying files in the "the12volt's Members' Downloads: Tech Tips - Car Security" category. |
Displaying 61 - 90 of 156 files.
|
|
(Please scan all files for viruses before opening.) |
| |
|
|
|
Name/Description |
 |
 |
Added By |
Date Added |
Size |
 |
 |
73 |
|
DBALL - No Key Detected
Tech tip: NISS3HT v1.03 and up
NISS4HT v1.00 and up
HONDA56 v1.46 and 1.47
GM10 v2.09 ...( TB106.pdf) |
|
 |
Ohmz |
11/10/2012 |
409 KB |
 |
 |
74 |
|
DEI 1063
Tech tip: Colorado/Canyon/H3/Cobalt and Saturn Ion 2004 up.
These vehicles have two passlock wires which function as key sense, 2nd ignition and also function as passlock 2 wires in addition to being able to crank the engine in conjunction with accessory wire losing voltage during the crank sequence. The Ion can also use DOC 1610 using a 555L. ...( DEIGM 1063.pdf) |
|
 |
howie ll |
4/1/2013 |
777 KB |
 |
 |
75 |
|
DEI 530T Modification
Tech tip: Heavy window modification ...( 1900.pdf) |
|
 |
Big Dog |
5/15/2008 |
83 KB |
 |
 |
76 |
|
DEI Direct Fax #1084
2005 and up Chrysler/dodge/Jeep Negtive 2nd Start/Acc wire Diagram ...( 1084a.pdf) |
|
 |
swamprat323 |
9/28/2006 |
63 KB |
 |
 |
77 |
|
DEI Directed Tech Tip 1051 GM Alarm disable
|
|
 |
Twelvoltz |
11/10/2006 |
29 KB |
 |
 |
78 |
|
DEI Directfax # 1091
Wait to start with a timer ( 528T) ...( 1091.pdf) |
|
 |
swamprat323 |
7/14/2006 |
24 KB |
 |
 |
79 |
|
DEI DirectFax # 1700
|
|
 |
swamprat323 |
8/4/2006 |
103 KB |
 |
 |
80 |
|
DEI Tech Tip 10000 Clutch Bypass
|
|
 |
seanw727 |
1/9/2012 |
1.4 MB |
 |
 |
81 |
|
DEI Tech Tip 1056
|
|
 |
dtk1 |
5/18/2008 |
63 KB |
 |
 |
82 |
|
DEI Tech Tip 1077
Isolating ignition during remote starts. Accessory/Ignition/Starter Wire Isolation.
When installing a remote starter into certain vehicles, you may experience the starter motor grinding excessively either during the key-takeover procedure or during the entire remote start process. This is typically caused by two or more wires that share a common contact at the key cylinder at rest, in a particular position (accessory position only, etc.), or during a mid-point between two positions. The solution for this symptom is usually to isolate the one (or more) of the circuits that have a common contact point by using a relay or by using the builtin Flex Relay found in most Directed remote starters (be sure to program Flex Output accordingly!). Known vehicles to require this doc include but are not limited to: 1993-1997 Nissan Altima, 1999-2006 Toyota Celica, 1999-2005 Toyota Echo and 2010+ Kia Soul. ...( 1077.pdf) |
|
 |
howie ll |
12/8/2011 |
357 KB |
 |
 |
83 |
|
DEI Tech Tip 1082 - 2001 Town and Country Parking Lights
|
|
 |
Twelvoltz |
2/22/2007 |
26 KB |
 |
 |
84 |
|
DEI tech tip 1091
|
|
 |
howie ll |
7/3/2011 |
24 KB |
 |
 |
85 |
|
DEI Tech tip 1097
Interfacing with Normally Closed door triggers
techtips
The door trigger switch on some vehicles (predominantly Ford models) rests at ground while the door is closed and goes to an open circuit when the door is opened. Some Directed security/remote start models can be programmed to accept a N.C. door trigger input on the (-) door trigger input, however this will only accept ONE door on the single (-) door trigger input wire (*see note at the bottom of the page for an exception). When more doors must be monitored or if working with a Directed system that does not have multiple N.C. door trigger inputs, use the following diagram (repeat per door trigger) to create a useable (+) switching door trigger output from each N.C. door trigger. ...( Ford 1097.pdf) |
|
 |
howie ll |
7/24/2012 |
626 KB |
 |
 |
86 |
|
DEI Tech Tip 1606
DEI Techtip 1606
2006 Cobalt PK3+ Keysense/Second Ignition bypass using 556U ...( TechTip 1606.pdf) |
|
 |
Twelvoltz |
10/26/2006 |
175 KB |
 |
 |
87 |
|
DEI Tech Tip 1919
Adding Multiple L.E.Ds IN SERIES ...( 1919.pdf) |
|
 |
lurch228 |
8/3/2016 |
1 MB |
 |
 |
88 |
|
DEI Tech Tip 1920
Low Battery issue for Responder LE Remotes ...( 1920.pdf) |
|
 |
lurch228 |
8/3/2016 |
733 KB |
 |
 |
89 |
|
DEI Tech Tip 1921
Interfacing with Normally Closed door triggers ...( 1921(1).pdf) |
|
 |
lurch228 |
8/3/2016 |
626 KB |
 |
 |
90 |
|
DEI Tech Tip 1923
LED Modifications to Directed Systems Viper, Python, Clifford ...( 1923.pdf) |
|
 |
lurch228 |
8/3/2016 |
829 KB |
| |
|
Browse or Search for Files |
Browse by category
Or enter a search term
| |
|
Follow the12volt.com
Friday, May 2, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.