the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Latching Relay?


Post ReplyPost New Topic
< Prev Topic Next Topic >
nitrous 
Member - Posts: 1
Member spacespace
Joined: February 09, 2006
Posted: February 09, 2006 at 10:48 AM / IP Logged  

This is my first post and need help from the pros.  Not very good with electrical systems.

I am using a momentary switch for nitrous activation.  I need it so I can push the button and have the system stay on, until the ground is cut via a wide open throttle switch.  The the thing i don't understand is how to make the latching relay reset it's self after it completes a cycle.  I need it to reset it's self, so when I go back to full throttle the nitrous will not re-activate.  So it requires pushing the button again to activate.

Any schematics or list of parts would be awesome.  Thanks

infinkc 
Silver - Posts: 437
Silver spacespace
Joined: October 28, 2002
Location: United States
Posted: February 09, 2006 at 9:29 PM / IP Logged  
Latching Relay? -- posted image.
you will need one more relay hooked to your open throttle switch, so when it is triggered it will send a pulse back to the momentary switch to disengage the latching. you will also need it to cut the signal off so the open throttle switch doesnt keep activating the latched relay as well.
There are 10 types of people in the world, ones that understand binary and ones that dont.
hotwaterwizard 
Silver - Posts: 1,350
Silver spacespace
Joined: December 11, 2003
Location: California, United States
Posted: February 09, 2006 at 11:50 PM / IP Logged  

When power is dropped the relay resets it's self automaticly.

just hook the ground where you hook the ground  that is cut by the throttle switch.

Latching Relay? -- posted image. 

John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !
sane 
Member - Posts: 1
Member spacespace
Joined: February 02, 2006
Location: Trinidad and Tobago
Posted: March 06, 2006 at 12:35 PM / IP Logged  
does anyone have a schematic diagram of a remote start  module with about 3to 6 relays with diodes

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, June 13, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer