04 dodge ram, aps-920 alarm/remote start

I have a 04 Dodge Ram 1500 gas. Im installing Prestige Model APS-920 with bypass Xpresskit XK531. i got the prestige hooked up  and working ive read that most Dodge rams dont need a bypass. Ive try remote star the truck but it shuts off right away,so im thinking it does need a bypass. The truck has no factory alarm so my problem is how can i know when the bypass module is programed when it dont show security key light on dash cuz it dont have one. If Any have any info on the remote star or bypass would be a big help since first time using this kind of  alarm and bypass Thanks for any help.

This is what it has under programing for remote star                             default

! RF Start chirp                     Off            On                                                      On

2 Run Time                          5min       10min    15min   20min                  10min

3 Park Light                         On steady                Flash                                  steady

4 Input check                       Voltage                Tach                                        Tach

5 Voltage level                     >0.5v b4 start           <0.5v b4 start                   >0.5

6 Ing2 select                        off w/crank       on w/crank    same as accy     on w/crank

7 Diagnostics                      off                    on                                                     off

8 crank time                         0.8sec    1.0sec     1.5 sec    2.0sec                   1.0sec

9gas/diesel                           gas     diesal10   diesal 15    diesal 20            gas

10 crank averageing            averaging         preset  time                                 averaging