installing power capacitor

Home / the12volt's Install Bay / Car Audio / installing power capacitor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nickb20

Member - Posts: 17

Joined: December 05, 2002

Location: United Kingdom

Posted: March 22, 2003 at 5:26 PM / IP Logged

What is the best way of installing a power capacitor, i mean where in the system should they go.

CruisinS&S

Copper - Posts: 225

Joined: February 05, 2003

Location: United States

Posted: March 22, 2003 at 9:51 PM / IP Logged

Run the main battery wire to a ddistribution blockthen hook up the capacitor to one of the terminals just as you would for an amp

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: March 22, 2003 at 11:41 PM / IP Logged

Do you want to run it to a distribution block? Or straight to the amp? If running it to more than one amp you will want to hook it in just before the distro block. If your power cable goes directly to the amp then add in on the power lines within 18 inches of the amp.

Must be mounted within 18 inches of amp(s) for optimal performance

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

installing power capacitor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.