the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Which box to choose


Post ReplyPost New Topic
< Prev Topic Next Topic >
eeh1025 
Copper - Posts: 113
Copper spacespace
Joined: November 26, 2002
Location: United States
Posted: March 24, 2003 at 8:26 PM / IP Logged  
Hi there i have 2 JL audio 12W6 and a Alpine MRD-M500. i was wondering which box do you think would be the best. I what it so people can hear me coming a 1/4 mile down the street. would a sealed, ported, or bandpass or what ever else would be the best for what i have. thanks alot
donkason 
Copper - Posts: 189
Copper spacespace
Joined: December 27, 2002
Location: United States
Posted: March 24, 2003 at 9:00 PM / IP Logged  
A ported box would shake the earth with deep low bass but you will sacrafice some sound quality.
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: March 24, 2003 at 9:14 PM / IP Logged  

I replied to your email and made some suggestions

thepencil 
Gold - Posts: 1,526
Gold spacespace
Joined: December 16, 2002
Location: Canada
Posted: March 25, 2003 at 1:12 PM / IP Logged  
To determine which style of enclosure that is best suited for you depend on a few variables. The type of music you listen to, the trunk size of your vehicle, how much room you have for the enclosure and the type of vehicle. They are just a few considerations you will have to think about when you make your choice. Once you have chosen your enclosure, the performance of your woofers will vary depending on the type of enclosure the woofer is placed in. Below are several enclosure designs which I have listed, each designed will meet specific needs and wants of an individual. In my opinion, there is no wrong or right answer in choosing the correct enclosure. It’s a very personal thing. What one likes, does not always work for someone else. So, make sure you get a big enough box that it will fit within the specification of your woofer. What you can do is go to a big audio store that have all three of this setup. Bring your favorite music CD and ask them to play it for you. It’s easier to make your choice when you are able to hear them all side by side. I personally like the woofers that you have in sealed enclosure. I hope this sort of help answer your questions.
1. Sealed enclosure. Offering great accuracy, best tonal quality and terrific low bass from a very small enclosure.
2. Ported enclosure. Designed to play lower bass louder than the
sealed enclosure, power handling is great, and is more efficient than the sealed design.
3. Bandpass enclosure. Offering good frequency response and great overall output, however, power handling is the lowest of the three and it is also the largest enclosure of the group.
Be careful whose advice you buy, but be patient with those who supply it.Which box to choose - Last Post -- posted image.
eeh1025 
Copper - Posts: 113
Copper spacespace
Joined: November 26, 2002
Location: United States
Posted: March 25, 2003 at 8:10 PM / IP Logged  
Hey there thanks for all your help im going to go with the sealed enclosure i went to an audio store and took my amp and heard them all and the sealed sounded the best. Ive got one more question for you i have the Alpine MRD-M500 and it is 2 ohm stable now my subs go down to 1.5 ohms when i turn it up it cuts off. the guy at the place told me since it was only a .5ohm of a difference he thinks i should put in the resistors to handle it. will this work and right now i followed the chart and i have 2 10ohm and 2 27ohm. which should i change it too. thanks alot for your help.
Ernie
thepencil 
Gold - Posts: 1,526
Gold spacespace
Joined: December 16, 2002
Location: Canada
Posted: March 26, 2003 at 10:47 AM / IP Logged  
Sorry Ernie, but I do not know how to advise you in this question. I have only used a resistor on to a tweeter and have never experienced the affect of it on a sub.   I can only guess. The gentlemen that can definitely answer your question is Velocity Motor. Big Purds is the other gentlemen who I am confident he can answer your question as well. I am sure they will come around any moment now when their names are bought up in here.
Be careful whose advice you buy, but be patient with those who supply it.Which box to choose - Last Post -- posted image.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 27, 2003 at 11:49 AM / IP Logged  

Which box to choose - Last Post -- posted image.

You need to hook the subs up like this for a 6 ohm load.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer