the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Clifford Smart Windows 4


Post ReplyPost New Topic
< Prev Topic Next Topic >
Tbonespitin 
Member - Posts: 5
Member spacespace
Joined: February 18, 2003
Location: United States
Posted: April 02, 2003 at 1:20 AM / IP Logged  
Alright I have some problems with this unit.   I have a 97 chevy c/k1500. I wired the smart windows unit to the driver and passenger windows at the drivers switch.  Heres my problem, I hooked it up.  All wires correctly as far as I can tell. (double checked everything)  I plug the unit in and hit the drivers window on the switch. (not the alarm remote but the window switches)  Window rolls up, hit the down button... works fine.  Next I hit the passenger window, up and down both work fine.   I think everything is fine, I go to roll both windows down at the same time to program the smart windows via cliffnet because it says to start with the windows down and I get nothing.  I check the fuse and the 30 amp is blown. I replaced it and everything works again till I hit both switches at once.  Fuse goes again. So I try a 40 amp fuse instead, everything works fine.  So I plug my lap top in and start programing.  Well I must have hit the wrong button up cause somehow during the process my passenger window switch gets reversed. (down is now up, up is down)  Remember It worked properly at first, no connections were changed, only thing different was I was programming them with cliffnet.  Well at this point I cant get them to program properly according to the directions.  There supposed to vent slightly when done and mine were all the way down.  so I start playing with the switches on the door and the divers is working fine but my passenger is totally screwed up. Moving in short increments in the wrong directions and what not.  Next thing I know the smartwindows is smoking and the units toast. (smoke, plastic melting)   So at this point im at a loss, the connections all have to be correct because they wouldn't have worked in the first place correct? Did i just screw up in the programing sequence and is it possible that could kill the unit.  Like I said I don't get how the passenger window all of a sudden went from working properly to being reversed with absolutely NO connections changing.  sorry for the long post I just really need some assistance.  thanks in advance
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 02, 2003 at 7:58 AM / IP Logged  
What did you use for the trigger wire from the Clifford for the windows module ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
2k2AccordEX 
Member - Posts: 16
Member spacespace
Joined: March 17, 2003
Location: Canada
Posted: April 02, 2003 at 9:03 AM / IP Logged  

Well now that you fried the Smart-Windows module, try getting a 529T window roll-up module (Directed Electronics). I've installed this unit in many vehicles with no problems, all you do is wire it up and there's nothing to program,  it automatically shuts off when the windows have reached their full travel mode.

1997 Chevy pickup Window up:    Driver's Dark Blue      Passenger's Light blue

If I have an idea, and you have an idea and we share ideas, then we each have two Ideas, together we have four.
OmarR 
Copper - Posts: 162
Copper spacespace
Joined: April 02, 2003
Location: Indiana, United States
Posted: April 02, 2003 at 12:44 PM / IP Logged  
Dont use the 529T. Use the 530T.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer