the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 traverse remote start delay


Post ReplyPost New Topic
< Prev Topic Next Topic >
pjk485 
Member - Posts: 11
Member spacespace
Joined: January 28, 2010
Location: Louisiana, United States
Posted: January 28, 2010 at 7:50 PM / IP Logged  
I just installed an Autopage RS-730 remote start with a DLPK. Everything works fine except that it takes 15-20 seconds for the car to remote start. The ignition powers on then 15-20 seconds later it starts. It starts fine, doesn't die after starting, does remote takeover just fine. I don't know what it could be. I talked to DEI and the tech didn't seem to think it was a problem. Any ideas?
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 28, 2010 at 8:12 PM / IP Logged  

i think you have autopage programmed for diesel. the pause time is for the glow plugs to heat up on diesels.

default the unit and program what you need.

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
pjk485 
Member - Posts: 11
Member spacespace
Joined: January 28, 2010
Location: Louisiana, United States
Posted: January 28, 2010 at 8:27 PM / IP Logged  
No that is the first thing i checked haha.
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: January 28, 2010 at 8:41 PM / IP Logged  

Funny, i have noticed odd delays on some GM remote starts i have done recently and one was a Traverse. I use Idatalink and the delay was a little longer than usual but not as long as you. I also have noticed a lot of shutdown delays too. I can press the brake and count to 3 before it shuts off.

I know this doesn't help any but i thought it was odd...

Mike M2
Tech Manager
CS Dealer Services
pjk485 
Member - Posts: 11
Member spacespace
Joined: January 28, 2010
Location: Louisiana, United States
Posted: January 28, 2010 at 8:59 PM / IP Logged  
Yea i don't know what it is. I don't have the problem with the shutdown just the start. Does the Idatalink give you a brake output? That could be where the shutdown delay is coming from.
jperez_jr_ 
Member - Posts: 10
Member spacespace
Joined: February 12, 2007
Location: United States
Posted: August 09, 2010 at 4:36 PM / IP Logged  
I had this problem with some GM's too. Make you the correct ACC wire is getting powered directly from the RS and just not the bypass module.
Jorge Perez
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 09, 2010 at 6:34 PM / IP Logged  
Was this wired W2W or D2D?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer