viper 5901 in 2002 nissan frontier

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 in 2002 nissan frontier (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: January 15, 2011 at 9:09 PM / IP Logged

Conatant 12volts to all red leads on the heavy harness, pink white to ignition 2 (should really be ignition and iginiton 1), cut the starter 1 wire only, the second wire is a cold start wire it with a relay like this,

Pin 30- !2 volts constant

pin- 87 second starter wire

pin 85- GWR

pin 86- take a feed from the first start wire engine side.

breaker1369

Member - Posts: 27

Joined: April 02, 2009

Location: California, United States

Posted: January 15, 2011 at 9:53 PM / IP Logged

coo thanks ill post up soon with an update...

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 in 2002 nissan frontier

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.