Led’s Blink Too Fast?

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Led’s Blink Too Fast? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Cbr629

Copper - Posts: 79

Joined: March 18, 2002

Location: Maryland, United States

Posted: April 29, 2003 at 4:47 AM / IP Logged

I INSTALL ALL LED'S IN MY MOTORCYCLE BUT NOW THE TURN SIGNALS BLINK TOO FAST,HOW CAN I SLOW IT DOWN?

thanks

MielGibson

Copper - Posts: 74

Joined: January 03, 2003

Location: United States

Posted: April 29, 2003 at 8:51 AM / IP Logged

You need to connect a dummy load (it's just a resistor) across the LED lamp.

You can get them h e r e

MielGibson

Copper - Posts: 74

Joined: January 03, 2003

Location: United States

Posted: April 29, 2003 at 8:58 AM / IP Logged

MielGibson wrote:

You need to connect a dummy load (it's just a resistor) across the LED lamp.

You can get them h e r e

Edit:

www.jamstrait.com

Cbr629

Copper - Posts: 79

Joined: March 18, 2002

Location: Maryland, United States

Posted: April 29, 2003 at 9:25 AM / IP Logged

I went to the site but you have to be a dealer to buy there,do you know what size resistor to use?

thanks

MielGibson

Copper - Posts: 74

Joined: January 03, 2003

Location: United States

Posted: May 01, 2003 at 7:56 AM / IP Logged

Sorry, I don't. Another solution would be to change the flasher. If you are using a thermal flasher change it to an electronic flasher/blinker unit which is commonly available at your local auto parts store.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Led’s Blink Too Fast?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.