the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 , 2003 mercedes s class canbus


Post ReplyPost New Topic
< Prev Topic Next Topic >
cmpcpro 
Member - Posts: 3
Member spacespace
Joined: November 09, 2011
Location: California, United States
Posted: November 09, 2011 at 10:58 PM / IP Logged  
I came on here earlier requesting the location of the speed sensor wire for my unit.. I have a 2000 S430 that came with Comand 2.5 and I upgraded to a 2003 widescreen Comand 2.0.. I thought I needed the VSS even though everyone said it goes thru the CANBUS.. Well I went to my buddies junk yard and checked an 03 car and sure enough the only wires going into the unit are D2B (fiber optics) wakeup and CANBUS HI AND LOW.. my question is.. how can I get my CANBUS to show the speed signal? On the 2.5 there are two speed signal wires, but this one obviously goes thru CANBUS.. there is a guy in Sweeden who wants almost $300 for a Speed signal converter, and it looks to have four wires.. power, ground, canbus hi and low. I am not sure how it fixes this and I would pay the money, I probably will but I didn't want to wait a month for it to come.. If anyone can help I would really appreciate it!
cmpcpro 
Member - Posts: 3
Member spacespace
Joined: November 09, 2011
Location: California, United States
Posted: November 14, 2011 at 10:42 PM / IP Logged  
Nobody has any information on this?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer