the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5101 on 01 silverado


Post ReplyPost New Topic
< Prev Topic Next Topic >
ryan12 
Member - Posts: 4
Member spacespace
Joined: September 26, 2012
Location: Arizona, United States
Posted: September 26, 2012 at 10:23 PM / IP Logged  
I don't get an error code at all
kreg357 
Platinum - Posts: 7,802
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: September 27, 2012 at 6:35 AM / IP Logged  

OK.  Let me see if I got this right. 

The DB-ALL has the correct firmware and programmed correctly.

The Vipers' Lock and Unlock work OK, including flashing the Parking Lights once for Lock and twice for Unlock.

When you try a remote start, the engine starter motor never cranks, the Viper does some clinking but the Parking Lights never flash, there are no error lights ( like Security ) on the dash, and the Viper only tries once to start the truck.

Shutdown diagnostics ( Page 56 of the older install guide I have ) shows no errors.

Other assumptions:

The truck has a Automatic Transmission and the Viper is programmed for Auto Trans ( Menu 3, Item 1, Opt 2 )

You have verified / programmed the Viper for Engine Sensing = Tach Mode ( Menu 3, Item 2, Opt 4 )

You have successfully done the Viper Tach Learn process.

Perhaps you could list all your connections ( Viper to truck, Viper to DB-ALL and DB-ALL to truck )

Soldering is fun!
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: September 27, 2012 at 11:34 AM / IP Logged  
If you put a key in the ignition switch and try to remote start, does anything happen?
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer