2001 tribute remote start issues

Home / the12volt's Install Bay / Car Security and Convenience / 2001 tribute remote start issues (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: January 21, 2013 at 8:59 AM / IP Logged

Where did you pull 12v constant from? The wire at the ignition is only rated at 10amps so it could cause an issue in the future. Although it probably is not your issue here since you are getting 12 volts.

Try starting it with the key and do a remote start take-over (press remote start while it is running with the key then remove the key without touching the brake). Then see if it stays running or shuts off when you remove the key.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 tribute remote start issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.