the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5904 wrx 07 dome light issues


Post ReplyPost New Topic
< Prev Topic Next Topic >
benelectrical 
Copper - Posts: 59
Copper spacespace
Joined: June 10, 2012
Location: Australia
Posted: January 20, 2013 at 7:11 AM / IP Logged  

i fitted a viper 5904, to my subaru wrx 07

i hooked the doom light wire to the module works ok unlock/lock with no worries

but when driving mainly. taking off and slowing down, the dome light comes on and also the door switch wire on the cluster turns on and off

does anyone have any ideas?

thanks inadvance

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 20, 2013 at 10:16 AM / IP Logged  
Yes, probable bad door pin or your dome light supervision wire is shorting to ground.
benelectrical 
Copper - Posts: 59
Copper spacespace
Joined: June 10, 2012
Location: Australia
Posted: January 20, 2013 at 5:25 PM / IP Logged  
I checked all the door switches and wiring is all good. It only happens when slowly down and taking off tho?
benelectrical 
Copper - Posts: 59
Copper spacespace
Joined: June 10, 2012
Location: Australia
Posted: January 21, 2013 at 7:57 AM / IP Logged  

bump any more ideas?

lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: January 21, 2013 at 9:09 AM / IP Logged  
your dome light supervision wire is shorting to ground
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 21, 2013 at 11:31 AM / IP Logged  
Err, we've done that one already Lucas viper 5904 wrx 07 dome light issues - Last Post -- posted image.
You might check your voltage between the R/S fuses and ground.
benelectrical 
Copper - Posts: 59
Copper spacespace
Joined: June 10, 2012
Location: Australia
Posted: January 21, 2013 at 1:29 PM / IP Logged  
Could the dome light wire be getting a earth from the alarm module? R/s fuses?
benelectrical 
Copper - Posts: 59
Copper spacespace
Joined: June 10, 2012
Location: Australia
Posted: January 21, 2013 at 9:59 PM / IP Logged  

dissconnected the alarm, didnt play up

after disconnect my domelight wire from alarm it still played up

it was my additional shock sensor i plugged into the alarm

all fixed now, but why did that cause the issue?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer