the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

tuning with a dmm?


Post ReplyPost New Topic
< Prev Topic Next Topic >
suzukigs750ez 
Member - Posts: 1
Member spacespace
Joined: October 04, 2014
Location: Connecticut, United States
Posted: October 04, 2014 at 8:49 PM / IP Logged  
Hey guys. I'm just trying to understand how this concept works. I'm playing around with the idea. Before you say "don't do that" or any variation, please just answer :-) then you can say whatever!
I'm trying to set my aplifier gain. I have a LPF on the amp, gain, and then bass boost, subsonic filter etc. I just use the LPF and the gain (obviously). When using a DMM, my amp would be tuned to 31.62v. Now my question is, if i have the LPF down at 40hz (i use 80hz) and tune to 31.62 with equalizer off, LPF on the HU off, etc. like i have read many places, when i turn all this back on, the voltage will rise. I also use a 50hz test tone and use 20/30 for volume. So what i'm not understanding is, if i'm supposed to have all settings off or at minumum, when i turn it all back on and the voltage goes up, it won't be at the 31.62... so wouldn't you tune it all up, then set the gains? If someone can shed some light and explain the procedure a bit more, i'd be very greatful!
auto enhancers 
Copper - Posts: 203
Copper spacespace
Joined: April 09, 2012
Location: Indiana, United States
Posted: October 06, 2014 at 9:30 AM / IP Logged  
That was an exceptional hard post to try and follow. To set gains you need to find distortion. First from the head unit then the amp. So I take my Oscope and play a test tone and whatever overlap I am using, then read what the voltage is when I see a distorted signal. Then I note what volume my head unit is at. This is with the eq flat. Sub control up to max, I use max because that will give me the most and where I will see distortion. Next I go to the amp and start with everything at zero, set my crossover, subsonic and start the process over. I can see where I am getting a distorted signal and that I know is the best the amp can do.
Now if I really want to get into it I will start at the head unit and do multiple freq, and see where it all lies at. Music is dynamic unless you are going for a one note wonder. then just use that one freq.
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: October 08, 2014 at 1:34 PM / IP Logged  
Check the Car Audio Hot Topics forum and read the thread titled "how to set your gain."
Tuning, by the way, is a commonly used but incorrect term.
Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer