the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avital 3100, 97 CRV


Post ReplyPost New Topic
< Prev Topic Next Topic >
808gmac 
Member - Posts: 22
Member spacespace
Joined: November 28, 2011
Location: Hawaii, United States
Posted: March 23, 2015 at 3:44 AM / IP Logged Link to Post Post Reply Quote 808gmac
Installing avital 3100 in 97 CRV only to come across able to lock with key fob unable to unlock, if ground wire will unlock, can hear module click when fob pressed but no response, also unable to find gray Molex connector in l kick panel for door triggers, and will diodes need to be installed?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 23, 2015 at 3:57 AM / IP Logged Link to Post Post Reply Quote howie ll
Meter or test light* the Avital unlock wire, make sure there's an output.
GREEN/ red doors, blue/black hatch, driver floor loom or at factory alarm module driver kick panel where you might also find better lock unlock wires. Not at door entry plugs.
Best way to test, use an incandescent bulb test light such as Snap-On or Mac, locks, clip to ground, probe to suspect wire, triggers, clip to 12V+ constant, probes to wires will light up when doors are opened.
Diode together to the 3100 green wire, 1N4004 diodes, bands away from 3100.
Use the 3100 blue wire as a hood switch.
*Clip to 12V+ constant probe to unlock output.
808gmac 
Member - Posts: 22
Member spacespace
Joined: November 28, 2011
Location: Hawaii, United States
Posted: March 23, 2015 at 10:17 AM / IP Logged Link to Post Post Reply Quote 808gmac
So wires all can be found at green alarm connector? Don't have to find gray Molex? Door trigger wires, where can I find rear glass Ajar wire, driver door and other doors all can be tied in together ,for trigger?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 23, 2015 at 10:54 AM / IP Logged Link to Post Post Reply Quote howie ll
I've already explained:-
GREEN/ red doors, blue/black hatch, driver floor loom or at factory alarm module driver kick panel where you might also find better lock unlock wires.
Diode together to the 3100 green wire, 1N4004 diodes, bands away from 3100.
Use the 3100 blue wire as a hood switch.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer