85 Toyota pickup radio installation

Home / the12volt's Install Bay / Car Audio / 85 Toyota pickup radio installation

Welcome Guest :)

Members

< Prev Topic Next Topic >

ekilos

Member - Posts: 3

Joined: April 17, 2015

Location: Washington, United States

Posted: April 17, 2015 at 5:51 PM / IP Logged

So, I got some help from this forum about installing my radio and it reads as follows:

Constant 12V+ BLACK/ White

Switched 12V+ RED / Green

Ground WHITE/ Black

Left Front + Light GREEN/ YELLOW

Left Front - Light GREEN/ Black

Right Front + Light GREEN/ Red

Right Front - Light Green

The problem I'm having is that I have TWO separate wires with the RED / green color coding and I have no idea which to use. . .

ekilos

Member - Posts: 3

Joined: April 17, 2015

Location: Washington, United States

Posted: April 17, 2015 at 5:55 PM / IP Logged

85 Toyota pickup radio installation - Last Post -- posted image.

ekilos

Member - Posts: 3

Joined: April 17, 2015

Location: Washington, United States

Posted: April 17, 2015 at 7:44 PM / IP Logged

Well, hooked up what I could. Nothing melted or blew up, that's a success in my book.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.