ALPINE 1005 bypass

Hello, Big King, I'll help you out.First of all, you will need a on/off toggle switch and a push button switch.Now, The only way to activate the auxillary ports while driving is to connect the yellow/blue parking brake wire to the on/off switch(black side of wire goes to yellow/blue wire and the grey side of wire goes to +12v).The push button switch go to the foot brake wire(yellow/black).One end of the push button wire goes to yellow black wire and the other  end goes to ground........Now the important part,Once the switches are in place flip the toggle switch to the on position then off and press the push button switch 3 times and hold down on the third press.While maintaining your finger on the push button switch, flip the toggle switch on  and let go of the push button switch after you flipped the toggle switch to the on position the second time. To sum up what I just said the sequence is toggle..on..off..pushbutton..1..2..3 and..hold..third..time)..Toggle..to..on..position..again..second..time..then..let..go..of..the..push..button..switch.this should activate the aux ports. Let me know if this works or not.I know this is a lot of things to remember but you will be happy once it's done.