clifford matrix rsIII help...

I'm thinking of installing this alarm myself, but i'm was wondering how can i program my remote for remote start. Basically my question is how do i program my remote the way I like it and use all the features??

The RSIII I beleive has remote start already programmed into the remote. if it's typical DEI, it's default would be pressing arm and disarm at the same time to engage the remote start. As far as programmign the remote the way you like it, the installation manual, and owners manual should tell you how to do it. sorry I can't be more specific than that, but I dont' know what you want the remote to do precisely.

The instructions for this alarm are not inside the box. You have to be an authorized dealer to have access to the installation manual. The install manual is not inside the box.

well i got it from car toys and it actually came with the installations guide and the owner's guide. I've just finished reading the installation guide and i think i can tackle it. I haven't read the owner's guide yet. I want to go through the installlation guide 5 - 10 more times before i actually install it then i'll read the owners guide. My car has a turbo so i was trying to figure out how i can use this alarm to basically stay on for 3 minutes after i remove the key from the ignition and arm the car at the same time. Thanks for the quick reply guys.. :-)