Wiring Hazard Lights Relay To Viper 5706V Alarm, 2000 Honda Civic VTi

Hi everyone. I have a 2000 Honda Civic VTi (UK Si equivalent for the Americans) and I'm installing a Viper 5706V by myself. I have zero experience with alarm installations (Already a good start ), but I've done a fair amount of research, to prepare myself. Here is the diagram for the alarm: What I'm trying to do is wire the parking light output to my hazard lights, instead of the typical headlights and taillights. I just prefer this look because its more OEM. From my research, I need a relay to achieve this, correct? I bought a DPDT relay and here's the diagram for one: Am I correct with this wiring? 13 - Parking light output of alarm (Defaulted to negative) 14 - Ground 9 & 12 - Constant 12V 5 - Left turn signal 8 - Right turn signal 1 & 4 - Unused Do I need to change the polarity of the parking light output? There's jumper on the alarm itself. I'm worried I'm going to blow something if my wiring isn't right Do I need to get diodes for what I'm trying to do? I'm also having the relay piggyback on the alarm's main harness. As in 14 will go to black, 9 & 12 will go to red of the main harness. That's ok to do? If so, should I splice into the red before or after the fuse? I should also mention, I'm not using the remote start feature of this alarm. Your help is greatly appreciated. Thanks