2013 Honda CR-V, Crimestopper RS3-G2, PKALL, Not Working

Home / the12volt's Install Bay / Car Security and Convenience / 2013 Honda CR-V, Crimestopper RS3-G2, PKALL, Not Working

Welcome Guest :)

Members

< Prev Topic Next Topic >

paradoxum

Member - Posts: 3

Joined: October 08, 2015

Location: Ontario, Canada

Posted: December 01, 2025 at 1:01 PM / IP Logged

Hi All,

Need some help troubleshooting this remote starter setup. It's been working problem free till it got cold. The main symptoms include no response to the remotes and that the LED in the antenna for the RS does not light up. I've confirmed 12v and good ground to the RS unit and the PKALL. Hood latch is not grounded. The RS is responsive when I attempt to enter programming mode by pressing the valet switch 4 times - parking lights blink. The LED on the PKALL does not light up at all (that I have seen so far). PKALL is connected non-D2D. Am I correct in assuming that the RS should blink errors with it's antenna LED even if the PKALL is dead?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.