Confused with combining fuses

Home / the12volt's Install Bay / Car Audio / Confused with combining fuses (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cchoi112

Member - Posts: 5

Joined: August 01, 2003

Location: United States

Posted: August 05, 2003 at 6:27 PM / IP Logged

I currently am running two amps, each with a 30A inline fuse, from a single battery. If use a distribution block and also a single inline fuse holder to support both amps, what should the amperage be of the fuse on the "new setup"?

Thanks.

Colin

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: August 05, 2003 at 6:32 PM / IP Logged

Your main fuse at the battery should be 60 amps, the 2 fuses in the fused distribution block should each be 30 amps.

xetmes

Silver - Posts: 586

Joined: May 18, 2003

Posted: August 05, 2003 at 7:25 PM / IP Logged

bberman1 wrote:

Your main fuse at the battery should be 60 amps, the 2 fuses in the fused distribution block should each be 30 amps.

I second that Confused with combining fuses - Last Post -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Confused with combining fuses

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.