wire colors on no name brand starter

i removed a remote starter from someones truck and replaced it with an alarm/start/keyless. i dont know who installed it in the first place, it may have been the dealer (dodge ram). im trying to find out what wires are for what. it is a no name brand starter. the only numbers on it are A816. i cant find anything on it. it has a 6 pin harness with the thick wires- green, 2 blue, red, yellow and RED / white stripe. it has a very small 3 pin and a regular 12 pin harness, i dont know the colors off hand but can look if/when needed. if anyone can help me to find out what wires are for what i would really appreciate it. its gettin cold here. the dials molded in the plastic casing say it was from 98'. thanks again.

i cant find the edit button. but it doesnt have a remote to it it was wired to the factory keyless. and why am i marked as a newbie? i guess i read too much without posting?

It is going to be practically impossible to determine what goes where. Your best bet would be to post a picture of the unit and maybe someone will recognize it and be able to help. J Rilla

Owner/Installer