2002 Dodge Intrepid

Home / the12volt's Install Bay / Car Security and Convenience / 2002 Dodge Intrepid (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

godsegoizhuge

Copper - Posts: 214

Joined: December 12, 2002

Location: United States

Posted: November 22, 2003 at 3:14 PM / IP Logged

Hi, i just installed a remote start on an 02 dodge intrepid, everything works but when you remote start it and the heater is turned on, there is nothing bein blown out? Did i miss something in the install or what? I pretty sure i hooked up all the wires that i had to, but any input would be nice now.

vaderfop

Copper - Posts: 95

Joined: April 18, 2003

Location: United States

Posted: November 22, 2003 at 3:49 PM / IP Logged

Did you hook up the accessory wire, second accessory wire, and second ignition wire?

Here are there colors:

2nd Ignition - GREEN/ red

Accessory - BLACK/ orange

2nd Accessory - BLACK/ white

All these wires are in the ignition harness

More than likly the heater blower if run by one of these wires. Make sure if you need to hook up one of these that each of these have their own relay.

Remember check all your wires with a DMM!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 Dodge Intrepid

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.