Install Questions

Home / the12volt's Install Bay / Car Security and Convenience / Install Questions (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 28, 2004 at 4:34 PM / IP Logged

as far as mounting the LED (depending on the size) they can pretty much put it anywhere.

I always try to use s dummy plate...most cars have them, its a blank plate that might be for a feature that didnt come with that car. (like fog lights)

if you plan on keeping the truck for a bit, i would let them mount it. besides if they screw it up, THEY BOUGHT IT!

they will pay for anything they mess up.

i would have them put it so you can see it the most angles as possible.

as for the valet switch, again depends on the size and type.

you want it to be hidden.

if its a push button, you can put it behind the fuse box cover or just under the dash. place where you wil;l able to reach pretty easy, yet not in plain site.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 28, 2004 at 4:40 PM / IP Logged

remotep and must think alike!

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: January 28, 2004 at 5:08 PM / IP Logged

You know if there is more than one CC there. You could go to the other one, just in case it doesn't get resolved to your satisfaction.

The next step is to make a formal complaint to their head office, and that usually gets things straighten out pretty quickly.

Regards

EVIL Teken . . .

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Install Questions

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.