alarms using the factory keyless

Home / the12volt's Install Bay / Car Security and Convenience / alarms using the factory keyless (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

1nicemustang

Copper - Posts: 89

Joined: August 19, 2002

Location: United States

Posted: August 20, 2002 at 8:08 PM / IP Logged

hey everyone.........what alarms are offered out there that will utilize the factory keyless and remote system on a ford mustang? i dont want to have to carry two remotes with me.

Lee

gotoevolution

Member - Posts: 17

Joined: August 18, 2002

Location: United States

Posted: August 20, 2002 at 10:10 PM / IP Logged

Well if I'm not mistaken and I believe that I am not most alarms come with the standard option of being wired to unlock all the doors in the car when the alarm is deactivated and a relay can be used to used the remote start for the car, all these are standard options for any alarm.

Learn to evolve, EVOLUTION

Ray562

Member - Posts: 12

Joined: July 13, 2002

Location: United States

Posted: August 20, 2002 at 11:08 PM / IP Logged

hey what year is your mustang?

Ford Motor Company Alarm Tech

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: August 21, 2002 at 3:44 AM / IP Logged

There are alarm packeges available which do not come with remote control handsets. They learn the frequency of the cars current handset as long as it does not have code hopping. It has the complete features of any other alarm less the annoyance of carrying two handsets.

I know this because I sell them here in Ireland.

omega

Copper - Posts: 54

Joined: July 04, 2002

Location: Canada

Posted: August 21, 2002 at 5:48 AM / IP Logged

Never heard of an alarm that learns the frequency of a factory remote, but there are many factory keyless interface alarms...

Among them are the DEI Hornet 700T, the Omega AL-100H, and also the Audiovox Pursuit PRO9232 add-on alarm systems. The AL-100H is available for not too much on eBay for only $20 US + shipping (or $40 BuyItNow + shipping)...

1nicemustang

Copper - Posts: 89

Joined: August 19, 2002

Location: United States

Posted: August 21, 2002 at 7:29 AM / IP Logged

my year is 2001.......i am trying to get a ford alarm working on it but having problems with it self arming still and no horn chirp.

i can arm and disarm with the factory remotes..but if i disarm the system....1 minute later it arms again. the horn blows when disarmed and when triggered but not when armed.

both switches are in the correct position inside the module. its a system 4. maybe the module is bad? ive tryed the fax back system to no avail. any help??

Lee

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarms using the factory keyless

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.