IDQ10 & Soundstream RUB500-1?

Home / the12volt's Install Bay / Car Audio / IDQ10 & Soundstream RUB500-1? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Coeus

Member - Posts: 4

Joined: March 12, 2004

Posted: April 02, 2004 at 7:39 AM / IP Logged

Hey no pro, just as long as you help me to decide which you think would work best.

So, got any comments?

forbidden

Platinum - Posts: 5,353

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: April 02, 2004 at 12:44 PM / IP Logged

I'll get some comments for you when I have some time free later on hopefully.

Top Secret, I can tell you but then my wife will kill me.

westend

Member - Posts: 9

Joined: April 02, 2004

Location: United States

Posted: April 02, 2004 at 10:06 PM / IP Logged

Coeus, FYI Rubicon 500.1 specs-4ohm mono=200w.,2ohm mono=400w.,1ohm mono=500w.. I guess if you have the IDQ 10 d2 you have all the power you need. Even if you have the D4 you should be OK IMO. As to the 5 channel option, yeah there are some good choices out there at pretty good prices. Since the IDQ 10 is 250 rms any of the 5 channelamps should get you enough power. I'm not up on the specs for the Focals. You could probably get a decent 2 channel for the components and use the Rubicon for your sub. Alittle more wiring involved, though.

Forbidden, thanks for the response on the Eclipse sales. Gives me some insight as to prices, quality, and my future plans. I will take another look at the MBQuart. No dealers near me, however.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

IDQ10 & Soundstream RUB500-1?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.