I think I blew my window module

I've been messing with these things for a minute now and I think I blew one.  I connected it to the right wires, everything correct but It does nothing.  When I try to use the switch with the key on, nothing but the clicking.  I tested the switch side and get 12+, but the other side has nothing.  I switched the module out with my other one and it will vent with the remote, roll up and down with the switch but wont roll up when I arm the alarm.  I'm lost.  Any ideas?

Almost forgot, they are 530t's off a viper 560xv in a 96 gmc yukon.

So I fixed the window module (I'm sure the warranty is void now!) but I'm still having problems with the windows going upon arming the alarm.  If I ground the ground when armed wire from the window module the window goes right up.  If I tap into the alarms ground when armed I get nothing.  The alarm works fine, so I don't know what to do.  Any Ideas?

Check the alarm side, check for continuity between the "grounded when armed" wire and ground. I am starting to think that you have a bad ground because of the other problem you were having with the remote start. I would also double check all of your ground connections.Will              Just my $00.02

97 Chevy K1500 5.7L w/ Clifford Matrix RS2

BTW I am not a professional(well at procrastination maybe)

Be Gentle, I'm new to this :-)

Thats what it was, I meant to post it but I had a NMFL championship to win!"I'm Rick James bi***, enjoy yo' self Ah Ah Ah"

Dave Chappelle as Rick James

Glad that you got it fixed, if you have any more probs let me know.Will              Just my $00.02

97 Chevy K1500 5.7L w/ Clifford Matrix RS2

BTW I am not a professional(well at procrastination maybe)

Be Gentle, I'm new to this :-)