Resin in roller

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Resin in roller (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Duby

Member - Posts: 14

Joined: February 03, 2004

Location: United States

Posted: May 30, 2004 at 7:28 PM / IP Logged

I was fiberglassing my rear deck and it started pouring down rain on me so I had to move all my sh*t in tha house and set the roller down. The resin hardened in the roller and now I'm screwed. The roller cost me $20 so I dont wanna buy another one. Any suggestions??

$4000 stereo in a $1000 whip, thats how u do it

dangerranger96

Copper - Posts: 163

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 05, 2004

Location: United States

Posted: May 30, 2004 at 8:32 PM / IP Logged

buy a new roller, there's no way to fix it

Search for other posts by dangerranger96

Duby

Member - Posts: 14

Joined: February 03, 2004

Location: United States

Posted: May 30, 2004 at 11:04 PM / IP Logged

I tried acetone and laquer thinner but they didnt work. So I left the roller sitting in laquer thinner and went and saw shrek 2 with tha girl. I came back and banged the roller on the grounhd and the fiberglass is breaking off. I got like half of it out now so I'm gonna let it sit all night and try again in the morning.

$4000 stereo in a $1000 whip, thats how u do it

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 31, 2004 at 12:57 AM / IP Logged

If it's one of those nylon ribbed ones, you can take a pick at the ribs and pry off the dried fiberglass. That's what I do and it works great afterwards.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Duby

Member - Posts: 14

Joined: February 03, 2004

Location: United States

Posted: May 31, 2004 at 1:51 PM / IP Logged

I came home from work today and after letting it sit in the lacquer thinner all night it came off real easy

$4000 stereo in a $1000 whip, thats how u do it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Resin in roller

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.